LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2025 >> RAV4 Plug-In Hybrid SE >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Panels / Trim - Service Information (3 Of 3) (PHEV) >> Roof Garnish >> Disassembly [12/2021 - ] >> Procedure

Disassembly [12/2021 - ]: Procedure

  1. REMOVE NO. 1 ROOF SIDE GARNISH LID LH 
    1. Detach the claw and guide and remove the No. 1 roof side garnish lid LH.
      GTY1117268Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE NO. 2 ROOF SIDE GARNISH LID LH 
    1. Detach the claw and guide and remove the No. 2 roof side garnish lid LH.
      GTY1119328Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE FRONT ROOF SIDE GARNISH PROTECTOR LH (for Panoramic Moon Roof) 

    HINT: 

    When removing the front roof side garnish protector LH, if the double-sided tape is difficult to remove, heat the adhesive of the front roof side garnish protector LH using a heat light.

    Standard Value

    Part Temperature
    Front Roof Side Garnish Protector LH 20 to 30°C (68 to 86°F)
    WARNING:
    • Do not touch the heat light and heated parts.
    • Touching the heat light may result in burns.
    • Touching heated parts for a long time may result in burns.
    GTY749838Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    *a Heated Part
    *b Heat Light
    NOTE:

    Do not heat the front roof side garnish protector LH excessively.

    1. Remove the front roof side garnish protector LH.
      GTY1114347Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002