Disassembly [06/2020 - ]: Procedure

HINT: 

• When removing the back door garnish moulding protector LH, if the double-sided tape is difficult to remove, heat the adhesive of the back door outside garnish and back door garnish moulding protector LH using a heat light.
• Use the same procedure for both back door garnish moulding protectors LH.

Standard

WARNING:

• Do not touch the heat light and heated parts.
• Touching the heat light may result in burns.
• Touching heated parts for a long time may result in burns.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Heated Part
*b	Heat Light

1. Remove the back door garnish moulding protector LH.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT: 

When removing the back door garnish moulding protector RH, if the double-sided tape is difficult to remove, heat the adhesive of the back door outside garnish and back door garnish moulding protector RH using a heat light.

Standard

WARNING:

• Do not touch the heat light and heated parts.
• Touching the heat light may result in burns.
• Touching heated parts for a long time may result in burns.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Heated Part
*b	Heat Light

1. Remove the 3 back door garnish moulding protector RH.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Refer to PROCEDURE - Step 1 [06/2020 - 11/2024] , or refer to PROCEDURE - Step 1 [11/2024 - ]