Disassembly [06/2020 - ]: Procedure
- REMOVE REAR DOOR UPPER OUTSIDE MOULDING PAD
HINT:
When removing the rear door upper outside moulding pad, if it is difficult to remove, heat the adhesive of the rear door lower outside moulding LH and rear door upper outside moulding pad using a heat light.
Standard
Item Temperature Rear Door Lower Outside Moulding LH 20 to 30°C (68 to 86°F) Rear Door Upper Outside Moulding Pad WARNING:- Do not touch the heat light and heated parts.
- Touching the heat light may result in burns.
- Touching heated parts for a long time may result in burns.
*a Heated Part *b Heat Light NOTE:Do not heat the rear door lower outside moulding LH and rear door upper outside moulding pad excessively.
- REMOVE NO. 1 OUTSIDE MOULDING RETAINER
- REMOVE REAR DOOR MOULDING PAD LH
HINT:
When removing the rear door moulding pad LH, if it is difficult to remove, heat the adhesive of the rear door rear upper outside moulding LH and rear door moulding pad LH using a heat light.
Standard
Item Temperature Rear Door Rear Upper Outside Moulding LH 20 to 30°C (68 to 86°F) Rear Door Moulding Pad LH WARNING:- Do not touch the heat light and heated parts.
- Touching the heat light may result in burns.
- Touching heated parts for a long time may result in burns.
*a Heated Part *b Heat Light NOTE:Do not heat the rear door rear upper outside moulding LH and rear door moulding pad LH excessively.
- REMOVE REAR DOOR REAR OUTSIDE MOULDING PAD
HINT:
When removing the rear door rear outside moulding pad, if it is difficult to remove, heat the adhesive of the rear door rear upper outside moulding LH and rear door rear outside moulding pad using a heat light.
Standard
Item Temperature Rear Door Rear Upper Outside Moulding LH 20 to 30°C (68 to 86°F) Rear Door Rear Outside Moulding Pad WARNING:- Do not touch the heat light and heated parts.
- Touching the heat light may result in burns.
- Touching heated parts for a long time may result in burns.
*a Heated Part *b Heat Light NOTE:Do not heat the rear door rear upper outside moulding LH and rear door rear outside moulding pad excessively.