LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2025 >> RAV4 Plug-In Hybrid SE >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door / Hatch - Service Information (2 Of 2) (PHEV) >> Power Back Door Warning Buzzer >> Removal [06/2020 - 12/2021] >> Procedure

Removal [06/2020 - 12/2021]: Procedure

  1. PRECAUTION (w/ Hands Free Power Back Door) 
    NOTE:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal.

    Refer to BEFORE DISCONNECTING BATTERY [06/2020 - 10/2022]

  2. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL (w/ Hands Free Power Back Door) 

    Refer to REMOVAL [06/2020 - 12/2021]

  3. REMOVE REAR BUMPER COVER 

    Refer to REMOVAL [06/2020 - 12/2021]

  4. REMOVE POWER BACK DOOR WARNING BUZZER 
    1. Detach the clamp and remove the power back door warning buzzer.
      GTY904187Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the connector.
      NOTE:

      Do not subject the power back door warning buzzer to strong impacts or force, and do not drop it.

scientia non olet · About LEMON Manuals