Removal [06/2020 - 12/2021]: Procedure
- REMOVE SPOT LIGHT ASSEMBLY
- Using a screwdriver with its tip wrapped in protective tape, detach the claw and remove the spot light lens as shown in the illustration.
Remove in this Direction Protective Tape - Using a screwdriver with its tip wrapped in protective tape, detach the claw and guide and remove the spot light housing from the roof headlining assembly.
Remove in this Direction Protective Tape - Detach the claw and guide and remove the spot light housing from the spot light switch base.
- Using a screwdriver with its tip wrapped in protective tape, detach the claw and remove the spot light lens as shown in the illustration.
- REMOVE SPOT LIGHT BULB