Removal [06/2020 - ]: Procedure

REMOVE FRONT DOOR SCUFF PLATE LH
Refer to PROCEDURE - Step 23 [06/2020 - 12/2021] , or refer to PROCEDURE - Step 23 [12/2021 - ]
REMOVE COWL SIDE TRIM BOARD LH
Refer to PROCEDURE - Step 14 [06/2020 - 12/2021] , or refer to PROCEDURE - Step 14 [12/2021 - 10/2022] , or refer to PROCEDURE - Step 14 [10/2022 - ]
REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 15 [06/2020 - 12/2021] , or refer to PROCEDURE - Step 15 [12/2021 - 10/2022] , or refer to PROCEDURE - Step 15 [10/2022 - ]
REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 18 [06/2020 - 12/2021] , or refer to PROCEDURE - Step 18 [12/2021 - 10/2022] , or refer to PROCEDURE - Step 18 [10/2022 - ]
REMOVE FUSE BOX OPENING COVER
Refer to PROCEDURE - Step 19 [06/2020 - 12/2021] , or refer to PROCEDURE - Step 19 [12/2021 - 10/2022] , or refer to PROCEDURE - Step 19 [10/2022 - ]

REMOVE LIGHT CONTROL RHEOSTAT

Using a thin-bladed screwdriver, detach the claw and remove the light control rheostat in the direction indicated by the arrow shown in the illustration.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

	Remove in this Direction
	Protective Tape

HINT:

Tape the thin-bladed screwdriver tip before use.