Installation [10/2022 - ]: Procedure

1. Connect the connector.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Install the meter mirror sub-assembly with the 2 nuts.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

Refer to INSTALLATION [10/2022 - ]

HINT: 

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Refer to AUTOMATIC LEARNING CHART [12/2021 - ]

Refer to OPERATION CHECK [06/2020 - ]

Refer to DTC CHECK / CLEAR [06/2020 - ]