LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2025 >> RAV4 Plug-In Hybrid SE >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Service Information (PHEV) >> Combination Meter >> Installation [06/2020 - 10/2022] >> Procedure

Installation [06/2020 - 10/2022]: Procedure

  1. INSTALL COMBINATION METER ASSEMBLY 
    1. Connect the 2 connectors and attach the clamp.
      GTY986435Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Attach the guide and clip to install the combination meter assembly.
      GTY935667Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    3. Install the 4 screws.
      GTY937132Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 30

  3. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH 

    Refer to PROCEDURE - Step 31

  4. UPDATE ECU SECURITY KEY 
    NOTE:

    When the combination meter assembly assembly is replaced, update the ECU security key.

    Refer to UPDATE ECU SECURITY KEY [06/2020 - ]

scientia non olet · About LEMON Manuals