LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2025 >> Prius XLE >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge System - Diagnostics - Introduction >> Meter / Gauge System >> Customize Parameters [03/2023 - ] >> Customize Parameters [03/2023 - ]

Customize Parameters [03/2023 - ]

  1. CUSTOMIZE METER / GAUGE SYSTEM 
    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Customizing with the GTS
      1. Select the setting by referring to the table below.

        HINT: 

        Depending on the specifications of the vehicle, some items may not be displayed.

        Warning 

        Tester Display Description Default Setting ECU
        Lane Change Flashing Times Adjust Function to change the lane change flashing times. 3 $00:OFF, $01:3, $02:4, $03:5, $04:6, $05:7 Combination meter assembly
        Flasher Sound Volume Adjust Function to change the turn signal flasher buzzer sound volume Medium $02:Large, $00:Medium, $01:Small Combination meter assembly
        Proposal Services Function Function to change the suggestion function display setting ON $00:OFF, $01:Parked, $03:ON Main body ECU (Multiplex network body ECU)
        Reverse Buzzer Setting Function to change the reverse buzzer setting Mute $00:Mute, $01:Continual Combination meter assembly

        Display 

        Tester Display Description Default Setting ECU
        ODO Display Time After IG OFF Adjust Function to change the trip result display time after the ignition switch is turned off 30s $00:30s, $01:60s, $02:600s, $03:OFF Combination meter assembly
    2. Customizing with the multi-display
      1. Enter the following menus: MENU / Setup / Vehicle / Vehicle customization.
      2. Select the setting by referring to the table below.
        Display Default Content Setting Relevant ECU
        Suggestion Function On Function to change the suggestion function display setting On/On (when the vehicle is stopped)/Off Main body ECU (Multiplex network body ECU)
    3. Customizing with the multi-information display
      1. Select the settings tab on the multi-information display.
      2. Select the setting by referring to the table below.
        NOTE:
        • When the cable is disconnected from the negative (-) auxiliary battery terminal, some of the settings will be reset. Therefore, it is necessary to make a note of each set value before disconnecting the cable.
        • As some values cannot be selected when the vehicle is being driven, perform the procedure with the vehicle stopped.

        HINT: 

        Depending on the specifications of the vehicle, some items may not be displayed.

        LANE DEPARTURE ALERT SYSTEM

        Display Description Setting ECU
        Lane Departure Alert System Lane departure alert system setting ON/OFF Forward recognition camera
        Alert Options Lane departure alert method setting Steering vibration/buzzer
        Alert Timing Lane departure alert timing level setting 1/2
        BSM

        Display Description Setting ECU
        - Blind spot monitor system setting ON/OFF Blind spot monitor sensor LH (B)
        Support timing Change Support Timing 1/2/3
        Brightness Outer rear view mirror indicator brightness level setting 1/2
        PCS

        Display Description Setting ECU
        Warning timing Change Warning Timing 1/2/3 Forward recognition camera
        PCS Pre-collision system setting ON/OFF
        PDA

        Display Description Setting ECU
        - PDA system setting ON/OFF Forward recognition camera
        Sensitivity Change Sensitivity 1/2/3
        SA System ON/OFF ON/OFF
        DA System ON/OFF ON/OFF
        OAA System ON/OFF ON/OFF
        PARKING ASSIST

        Display Description Setting ECU
        - TOYOTA parking assist-sensor system setting ON/OFF Clearance warning ECU assembly
        Parking Assist System Volume Clearance warning buzzer volume level setting 3 levels
        RCTA

        Display Description Setting ECU
        - RCTA function setting ON/OFF Blind spot monitor sensor LH (B)
        Parking Assist System Volume RCTA buzzer (blind spot monitor buzzer) volume setting 1/2/3
        RCD

        Display Description Setting ECU
        - RCD function setting ON/OFF Rear Television Camera Assembly
        PKSB

        Display Description Setting ECU
        - PKSB function setting ON/OFF Clearance warning ECU assembly
        SEA

        Display Description Setting ECU
        - Safe Exit Assist system setting ON/OFF Blind spot monitor sensor LH (B)
        Sensitivity Change Sensitivity 1/2/3
        Mirror indicate Door mirror indicator setting ON/OFF
        RSA

        Display Description Setting ECU
        - Road sign assist system setting ON/OFF Forward recognition camera
        Notification Method Above Speed Limit Excess speed notification method setting No Notification/Only Visual/Visual & Audio
        Others Others traffic sign notification method setting No Notification/Only Visual/Visual & Audio
        Notification Level Excess speed notification level setting 10 km/h (5 MPH), 5 km/h (3 MPH), 2 km/h (1 MPH)
        DRCC/SPEED LIMITER

        Display Description Setting ECU
        Acceleration Setting Acceleration Setting Low/Mid/High 1/2/3 ECM
        Speed Setting (Push) Speed Setting (Push) +/-1, +/-5, +/-10 +/-1, +/-5, +/-10
        Speed setting (Hold) Speed Setting (Hold) +/-1, +/-5, +/-10 +/-1, +/-5, +/-10
        Guide message System ON/OFF ON/OFF
        Curve Speed Reduction Curve Speed Reduction System OFF/Low/Mid/High 1/2/3
        VEHICLE SETTINGS

        Display Description Setting ECU
        Charging Settings Charging Schedule Setting the timer charging
        • Charge Now
        • Scheduled Events
        • Next Event
        		 Electric vehicle charger assembly
        Charging Current Changing the upper limit of the charging current MAX/16A/8A
        Connector Lock Changing the charging connector lock settings Auto Lock/Auto Lock & Unlock/OFF
        Battery Cooler Setting "HV Supply Battery Cooler" on/off. ON/OFF Battery ECU assembly
        Battery Heater Setting "HV Supply Battery Heater" on/off. ON/OFF
        Electric Supply Setting the power supply method Electric/Hybrid Battery ECU assembly
        Driver Break Suggestion Driver Break Suggestion ON/OFF ON/OFF Combination meter assembly
        LCA LCA ON/OFF ON/OFF Forward recognition camera
        FCTA FCTA FCTA setting ON/OFF Forward recognition camera
        Timing timing setting 3 levels
        TPWS setting Tire Set Switching Register replaced valve / ID - Tire Pressure Warning ECU and Receiver
        Tire Rotation Reset tire location -
        Tire Pressure Setting Set tire warning pressure -
        Pressure unit setting Change display units -
        Driver Monitor Settings Driver Monitor Alert Alert notification settings ON/OFF Driver Monitor ECU Assembly
        Drowsiness Alert Notification settings for drowsiness alert notifications ON/OFF
        Regenerative Brake Deceleration Deceleration settings 1/2/3 Hybrid Vehicle Control ECU
        Deceleration Memory Deceleration memory settings ON/OFF
        PBD System Settings Hands free power back door function setting ON/OFF Multiplex network door ECU
        Opening Adjustment Back door opening stop position setting when operated by power back door system 5 levels
        Volume Power back door buzzer volume level setting 3 levels
        Scheduled Maintenance Scheduled maintenance data reset Yes/No ECM
        Oil Maintenance Engine oil maintenance required reminder data reset Yes/No ECM
        Rear Seat Reminder Rear seat reminder function setting ON/OFF Main body ECU (Multiplex network body ECU)
        My settings setting Change Driver and Settings - Main body ECU (Multiplex network body ECU)
        function Setting of my settings function ON/OFF
        METER SETTINGS

        Display Description Setting ECU
        Language Display language setting * Related ECUs
        Units Display units setting *
        Meter Type Meter Type setting ON/OFF Combination meter assembly
        Eco driving indicator light Eco driving indicator light display setting ON/OFF
        EV Drive Information EV drive information setting EV Energy remaining/EV Distance remaining
        Eco-friendly driving information tab Hybrid System Eco Guidance Display setting in eco-friendly driving information tab ON/OFF
        Fuel Economy Displayed fuel economy display item setting Trip Average/Total Average/Tank Average
        Power Consumption Calculated value setting for electricity consumption information Trip Average/Total Average
        Audio tab Audio tab display setting ON/OFF
        Drive Information Display Contents AWD AWD system ON/OFF ON/OFF
        Drive Info Type Displayed drive information display item setting Trip/Total
        Drive Info Items Displayed drive information display item setting Average Speed/Distance/Total Time
        Trip Summary Current trip result display setting Drive Info/Charging Schedule
        Pop-Up Display TbT Navigation Interrupt display setting ON/OFF
        Telephone Interrupt display setting ON/OFF
        Audio Operation Interrupt display setting ON/OFF
        Volume Operation Interrupt display setting ON/OFF
        Voice Control Interrupt display setting ON/OFF
        Brightness Interrupt display setting ON/OFF
        Calendar Date setting -
        Default Settings Reset the combination meter settings to the default setting Yes/No Related ECUs
        1. *: Varies according to the vehicle specification.
scientia non olet · About LEMON Manuals