Removal [12/2022 - 03/2023]: Procedure

for 2WD: Refer to REMOVAL [12/2022 - 03/2023]

for AWD: Refer to REMOVAL [12/2022 - 03/2023]

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   1. Remove the bolt, nut and rear upper control arm assembly LH from the rear suspension member sub-assembly.
      NOTE:

      Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

1. Perform the same procedure as for the LH side.