LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2025 >> Prius Plug-In Hybrid SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Hybrid Battery System (HEV) - Diagnostic Codes (1 Of 2)) >> HYBRID BATTERY SYSTEM (for M20A-FXS) >> DTC P0B13-62: Hybrid/EV Battery Current Sensor "A"/"B" Signal Compare Failure [12/2022 - ] >> Description

DTC P0B13-62: Hybrid/EV Battery Current Sensor "A"/"B" Signal Compare Failure [12/2022 - ]: Description

WARNING: This page is about a different variant/trim than selected.

Refer to the description for DTC P0ABF-11.

Refer to DESCRIPTION 

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate DTC Output from Priority Note
P0B13-62 Hybrid/EV Battery Current Sensor "A"/"B" Signal Compare Failure A battery current sensor is malfunctioning.*
(1 trip detection logic)
  • No. 1 traction battery device box
  • Battery ECU assembly
  • Wire harness or connector
Comes on Master Warning:
Comes on
HV Battery A SAE Code: P0B13

*: The difference in output of the main and sub battery current sensors is large.