DTC P0A93-00: Inverter "A" Cooling System Performance [12/2022 - ]: Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK CONNECTOR CONNECTION CONDITION (INVERTER WITH CONVERTER ASSEMBLY CONNECTOR)
Refer to PROCEDURE - Step 3
Result
Result Proceed to OK A NG (The connector is not connected securely.) B NG (The terminals are not making secure contact or are deformed, or water or foreign matter exists in the connector.) C Result:
B
CONNECT SECURELY
Result:
C
REPAIR OR REPLACE HARNESS OR CONNECTOR
Result:
A
See step 2
- CHECK COOLING SYSTEM
Refer to Cooling System [12/2022 - ]
HINT:
If the "Cooling System" inspection results are normal, perform the next step.
Result
Proceed to NEXT Result:
NEXT
REPLACE HV COOLANT. Refer to REPLACEMENT [12/2022 - ]