LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2025 >> Prius Plug-In Hybrid SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Can Communication System (HEV) - Circuit Tests (1 Of 3) & Diagnostic Codes) >> CAN COMMUNICATION SYSTEM (for HEV Model) >> Brake Booster (Skid Control ECU) Communication Stop Mode [12/2022 - ] >> Description

Brake Booster (Skid Control ECU) Communication Stop Mode [12/2022 - ]: Description

WARNING: This page is about a different variant/trim than selected.
Detection Item Symptom Trouble Area
Brake Booster (Skid Control ECU) Communication Stop Mode Communication stop for "Brake Booster" is indicated on the "Communication Bus Check" screen of the GTS.
Refer to DIAGNOSIS SYSTEM [12/2022 - ]
  • No. 1 skid control ECU (brake booster with master cylinder assembly) connector
  • Power source circuit of No. 1 skid control ECU (brake booster with master cylinder assembly)
  • No. 1 skid control ECU (brake booster with master cylinder assembly) ground circuit
  • No. 1 skid control ECU (brake booster with master cylinder assembly)