Check Bus 4 Line [12/2022 - ]: Description
WARNING: This page is about a different variant/trim than selected.
| Symptom |
Trouble Area |
| There are ECUs or sensors that display a communication stop on the bus diagnostic screen. Or, there are ECUs or sensors that display communication stop history on the "Detail" screen. |
- CAN main bus line, CAN branch line or connector
- Central gateway ECU (network gateway ECU)
- Airbag ECU assembly
- No. 1 skid control ECU (brake booster with master cylinder assembly)
- No. 2 skid control ECU (brake actuator assembly)
- Steering sensor
- Power steering ECU assembly
- No. 3 global CAN junction connector
- No. 4 global CAN junction connector
|