Check Bus 1 Line [12/2022 - ]: Description

WARNING: This page is about a different variant/trim than selected.

Symptom	Trouble Area
There are ECUs or sensors that display a communication stop on the bus diagnostic screen. Or, there are ECUs or sensors that display communication stop history on the "Detail" screen.	CAN main bus line, CAN branch line or connector Central gateway ECU (network gateway ECU) Clearance warning ECU assembly (w/ Intuitive Parking Assist System) Forward recognition camera Millimeter wave radar sensor assembly Front side radar sensor (A) (w/ Front Side Radar Sensor System) Parking assist ECU (w/ Panoramic View Monitor System) Blind spot monitor sensor LH (B) Rear television camera assembly (w/ Parking Assist Monitor System) No. 2 global CAN junction connector No. 11 global CAN junction connector No. 12 global CAN junction connector (w/ Panoramic View Monitor System) No. 15 global CAN junction connector No. 16 global CAN junction connector (w/ Parking Assist Monitor System) No. 2 CAN junction terminal

Symptom

Trouble Area

There are ECUs or sensors that display a communication stop on the bus diagnostic screen. Or, there are ECUs or sensors that display communication stop history on the "Detail" screen.

CAN main bus line, CAN branch line or connector
Central gateway ECU (network gateway ECU)
Clearance warning ECU assembly (w/ Intuitive Parking Assist System)
Forward recognition camera
Millimeter wave radar sensor assembly
Front side radar sensor (A) (w/ Front Side Radar Sensor System)
Parking assist ECU (w/ Panoramic View Monitor System)
Blind spot monitor sensor LH (B)
Rear television camera assembly (w/ Parking Assist Monitor System)
No. 2 global CAN junction connector
No. 11 global CAN junction connector
No. 12 global CAN junction connector (w/ Panoramic View Monitor System)
No. 15 global CAN junction connector
No. 16 global CAN junction connector (w/ Parking Assist Monitor System)
No. 2 CAN junction terminal