Component Operating Range
P05DB
| All of the following conditions are met | A, B, C and D |
| A. Following condition is met | More than 0.22 seconds |
| +BS voltage | 8.5 V or higher |
| B. Up/Downstream communication | Valid |
| C. Both of the following conditions are met | More than 0.198 seconds |
| +BS cut MOS | Valid |
| +BS cut MOS voltage | Higher than 7.4 V |
| D. Following condition is met | Higher than 0.024 seconds |
| Power supply voltage ratio (SKS1/VSK1) and Power supply voltage ratio (SKS2/VSK2) are in correlation area | - |
P05E0
| All of the following conditions are met | A, B, C and D |
| A. Following condition is met | More than 0.22 seconds |
| +BS voltage | 8.5 V or higher |
| B. Up/Downstream communication | Valid |
| C. Both of the following conditions are met | More than 0.198 seconds |
| +BS cut MOS | Valid |
| +BS cut MOS voltage | Higher than 7.4 V |
| D. Both of the following conditions are met | - |
| Power supply voltage ratio (SKS1/VSK1) | More than 0.2 |
| Power supply voltage ratio (SKS2/VSK2) | Less than 0.8 |
| E. Both of the following conditions are met | - |
| Power supply voltage ratio (SKS1/VSK1) | More than 0.23 |
| Power supply voltage ratio (SKS2/VSK2) | Less than 0.77 |
| F. Both of the following conditions are met | - |
| Power supply voltage ratio (SKS1/VSK1) | More than 0.26 |
| Power supply voltage ratio (SKS2/VSK2) | Less than 0.74 |
| G. Normal status experience at high voltage | On |