Caution / Notice / Hint

HINT: 

• Use the same procedure for the RH side and LH side.
• The following procedure is for the LH side.

COMPONENTS (REASSEMBLY) 

Fig 1: Wheel Opening Moulding (For Rear Side) Reassembly Components

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
1	REAR QUARTER MOULDING LOWER PROTECTOR	75687	See step  1	-	-
2	NO. 1 BODY OUTSIDE MOULDING PAD	75696	See step  2	-	-