LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2025 >> Prius Plug-In Hybrid SE >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Panels / Trim - Service Information (2 Of 2) >> WHEEL OPENING MOULDING (for Rear Side) >> Disassembly [12/2022 - ] >> Procedure

Disassembly [12/2022 - ]: Procedure

  1. REMOVE NO. 1 BODY OUTSIDE MOULDING PAD 
    1. GTY1156513Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE REAR QUARTER MOULDING LOWER PROTECTOR 
    1. GTY1156514Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals