Installation [12/2022 - ]: Procedure

INSTALL SPARK PLUG

NOTE:

If a spark plug has been struck or dropped, replace it.

Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)

INSTALL IGNITION COIL ASSEMBLY

Refer to PROCEDURE - Step 2
INSTALL CENTER NO. 2 COWL TOP VENTILATOR LOUVER
PERFORM INITIALIZATION
1. Perform "Inspection After Repair" after replacing an ignition coil assembly or spark plug.
  Refer to INITIALIZATION [12/2022 - 03/2023] , or refer to INITIALIZATION [03/2023 - ]