LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2025 >> Land Cruiser Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Panels / Trim - Service Information (2 Of 2) >> Front Door Outside Moulding >> Removal [02/2024 - ] >> Procedure

Removal [02/2024 - ]: Procedure

  1. REMOVE FRONT DOOR LOWER OUTSIDE MOULDING SUB-ASSEMBLY LH 
    1. GTY1221951Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction Hole Plug
      Nut - -
      1. Remove the hole plug.
      2. Remove the nut.
      3. Apply protective tape around the front door lower outside moulding sub-assembly LH.
      4. Detach the clip and remove the front door lower outside moulding sub-assembly LH as shown in the illustration.
scientia non olet · About LEMON Manuals