Removal [02/2024 - ]: Procedure
- PRECAUTION WARNING:
Be sure to read precaution thoroughly before servicing.
Refer to PRECAUTION [02/2024 - ]
NOTE:After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal.
- REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY
Refer to REMOVAL [02/2024 - ]
- REMOVE NO. 2 HEATER TO REGISTER DUCT
Refer to PROCEDURE - Step 1
- REMOVE NO. 2 INSTRUMENT PANEL WIRE
Refer to PROCEDURE - Step 2
- REMOVE DEFROSTER NOZZLE ASSEMBLY
Refer to PROCEDURE - Step 3
- REMOVE ANTENNA DIVIDER