Caution / Notice / Hint
NOTE:
- When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
- Some parts must be initialized and set when replacing or removing and installing parts.
Refer to WORK PROCEDURE [02/2024 - ]
- When the combination meter assembly is replaced, update the ECU security key.
Refer to UPDATE ECU SECURITY KEY [02/2024 - ]
HINT:
If there is an open or short in the engine coolant temperature sensor circuit, the ECM stores DTCs. Troubleshoot the SFI system.