Caution / Notice / Hint
NOTE:
- After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.
Refer to BEFORE DISCONNECTING BATTERY [09/2022 - ]
HINT:
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
- After replacing the airbag sensor assembly, refer to work procedure.
Refer to WORK PROCEDURE [11/2022 - 03/2023] , or refer to WORK PROCEDURE [03/2023 - 08/2023] , or refer to WORK PROCEDURE [08/2023 - 09/2024] , or refer to WORK PROCEDURE [09/2024 - ]
HINT:
- To perform the simulation method, enter check mode (signal check) with the GTS.
Refer to CHECK MODE PROCEDURE [11/2022 - ]
- Perform the simulation method while checking the Data List.
Refer to DATA LIST / ACTIVE TEST [11/2022 - ]