LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2025 >> Corolla LE >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge System (Except 12.3 Inch) - Diagnostics - Introduction >> METER / GAUGE SYSTEM (except 12.3 Inch Display) >> Customize Parameters [09/2022 - 11/2022] >> Customize Parameters [09/2022 - 11/2022]

Customize Parameters [09/2022 - 11/2022]

  1. CUSTOMIZE METER / GAUGE SYSTEM 
    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Customizing with the GTS
      1. Select the setting by referring to the table below.

        HINT: 

        Depending on the specifications of the vehicle, some items may not be displayed.

        Warning 

        Tester Display Description Default Setting ECU
        Flasher Sound Volume Adjust Function to change the turn signal flasher buzzer sound volume Medium $02:Large, $00:Medium, $01:Small Combination meter assembly

        Display 

        Tester Display Description Default Setting ECU
        ODO Display Time After IG OFF Adjust Function to change the trip result display time after the ignition switch is turned off 30s $00:30s, $01:60s, $02:600s, $03:OFF Combination meter assembly
    2. Customizing with the multi-information display
      1. Select the settings tab on the multi-information display.
      2. Select the setting by referring to the table below.
        NOTE:
        • When the cable is disconnected from the negative (-) auxiliary battery terminal, some of the settings will be reset. Therefore, it is necessary to make a note of each set value before disconnecting the cable.
        • As some values cannot be selected when the vehicle is being driven, perform the procedure with the vehicle stopped.

        HINT: 

        Depending on the specifications of the vehicle, some items may not be displayed.

        for TMC Made

        CLOCK SETTING

        Display Description Setting ECU
        Change settings 12H/24H setting and clock adjustment Shot push/push and hold Combination meter assembly
        LDA (FOR 4.2 INCH TYPE MULTI-INFORMATION DISPLAY)

        Display Description Setting ECU
        - Lane departure alert system setting ON/OFF Forward recognition camera
        Low Speed Range Assist Low Speed Range Assist setting ON/OFF
        Alert Options Lane departure alert method setting Vibration/Beep
        Alert Timing Lane departure alert timing level setting 1/2
        LANE DEPARTURE ALERT SYSTEM (FOR 7 INCH TYPE MULTI-INFORMATION DISPLAY)

        Display Description Setting ECU
        - Lane departure alert system setting ON/OFF Forward recognition camera
        Low Speed Range Assist Low Speed Range Assist setting ON/OFF
        Alert Options Lane departure alert method setting Vibration/Beep
        Alert Timing Lane departure alert timing level setting 1/2
        PCS

        Display Description Setting ECU
        Warning timing Change Warning Timing 1/2/3 Forward recognition camera
        Warning buzzer Warning buzzer ON/OFF ON/OFF
        PCS Pre-collision system setting ON/OFF
        BSM

        Display Description Setting ECU
        - Blind spot monitor system setting ON/OFF Blind spot monitor sensor LH (B)
        Support timing Change Support Timing 1/2/3
        Brightness Outer rear view mirror indicator brightness level setting 1/2
        RCTA

        Display Description Setting ECU
        - RCTA function setting ON/OFF Blind spot monitor sensor LH (B)
        Parking Assist System Volume RCTA buzzer (blind spot monitor buzzer) volume setting 1/2/3
        SEA

        Display Description Setting ECU
        - Safe Exit Assist system setting ON/OFF Blind spot monitor sensor LH (B)
        Sensitivity Change Sensitivity 1/2/3
        Mirror indicate Door mirror indicator setting ON/OFF
        RSA

        Display Description Setting ECU
        - Road sign assist system setting ON/OFF Forward recognition camera
        Notification Method Above Speed Limit Excess speed notification method setting No Notification/Only Visual/Visual & Audio
        Overtaking No overtaking notification method setting No Notification/Only Visual/Visual & Audio/Visual & Haptic
        Others Others traffic sign notification method setting No Notification/Only Visual/Visual & Audio
        Notification Level Excess speed notification level setting 10 km/h (5 MPH), 5 km/h (3 MPH), 2 km/h (1 MPH)
        VEHICLE SETTINGS

        Display Description Setting ECU
        DRCC (RSA) DRCC (RSA) System ON/OFF ON/OFF ECM
        Speed Limit Offset Speed Limit Offset +/- +/-1, +/-5, +/-10
        Overtake Prevention System ON/OFF ON/OFF
        Acceleration Setting Acceleration Setting Low/Mid/High 1/2/3
        Speed Setting (Push) Speed Setting (Push) +/-1, +/-5, +/-10 +/-1, +/-5, +/-10
        Speed setting (Hold) Speed Setting (Hold) +/-1, +/-5, +/-10 +/-1, +/-5, +/-10
        Guide message System ON/OFF ON/OFF
        Curve Speed Reduction Curve Speed Reduction System OFF/Low/Mid/High 1/2/3
        TPWS setting Tire Set Switching Register replaced valve / ID - Tire Pressure Warning ECU and Receiver
        Tire Rotation Reset tire location -
        Tire Pressure Setting Set tire warning pressure -
        Pressure unit setting Change display units -
        Scheduled Maintenance Scheduled maintenance data reset Yes/No Combination meter assembly
        METER SETTINGS

        Display Description Setting ECU
        Language Display language setting * Related ECUs
        Units Display units setting *
        Analog Meter Change Dial Type Tacho Meter/Speed Meter/HV Meter/OFF Combination meter assembly
        Eco driving indicator light Eco driving indicator light display setting ON/OFF
        EV driving indicator light EV driving indicator light display setting ON/OFF
        ECO tab Fuel Economy Displayed fuel economy display item setting Trip Average/Total Average/Tank Average
        Audio tab Audio tab display setting ON/OFF
        Vehicle information tab Display Contents Displayed drive information display item setting ON/OFF
        Drive Info Type Displayed drive information display item setting Trip/Total
        Drive Info Items Displayed drive information display item setting -
        Pop-Up Display TbT Navigation Interrupt display setting ON/OFF
        Telephone Interrupt display setting ON/OFF
        Audio Operation Interrupt display setting ON/OFF
        Volume Operation Interrupt display setting ON/OFF
        Voice Control Interrupt display setting ON/OFF
        Default Settings Reset the combination meter settings to the default setting Yes/No Related ECUs
        1. *: Varies according to the vehicle specification.

        for TMMMS Made

        CLOCK SETTING

        Display Description Setting ECU
        Detail Settings 12H/24H setting and clock adjustment - Combination meter assembly
        LDA

        Display Description Setting ECU
        Steering Assist Steering control function setting ON/OFF Forward recognition camera
        Alert Lane departure alert method setting Buzzer/OFF
        Sensitivity Lane departure alert timing setting 1/2
        Sway Warning Vehicle sway warning function setting ON/OFF
        Sway Sensitivity Sway warning sensitivity setting 1/2/3
        LTA

        Display Description Setting ECU
        Lane Center Lane tracing assist function setting ON/OFF Forward recognition camera
        Steering Assist Steering control function setting ON/OFF
        Alert Lane departure alert method setting Buzzer/OFF
        Sensitivity Lane departure alert timing setting 1/2
        Sway Warning Vehicle sway warning function setting ON/OFF
        Sway Sensitivity Sway warning sensitivity setting 1/2/3
        PCS

        Display Description Setting ECU
        - Pre-collision system setting ON/OFF Forward recognition camera
        Sensitivity Pre-collision system sensitivity setting 1/2/3
        BSM

        Display Description Setting ECU
        - Blind spot monitor system setting ON/OFF Blind spot monitor sensor LH (B)
        Brightness Outer rear view mirror indicator brightness setting 1/2
        Sensitivity Blind spot monitor system sensitivity setting 1/2/3/4
        RCTA

        Display Description Setting ECU
        - Rear crossing traffic alert function setting ON/OFF Blind spot monitor sensor LH (B)
        RSA

        Display Description Setting ECU
        - Road sign assist system setting ON/OFF Forward recognition camera
        Notification Method Above Speed Limit Excess speed notification method setting No Notification/Only Visual/Visual & Audio
        Overtaking No overtaking notification method setting No Notification/Only Visual/Visual & Audio
        Others Others traffic sign notification method setting No Notification/Only Visual/Visual & Audio
        Notification Level Excess speed notification level setting -5 to 10
        VEHICLE SETTINGS

        Display Description Setting ECU
        TPWS Tire inflation pressure display function setting Set Pressure/Change Wheel Tire Pressure Warning ECU and Receiver
        Scheduled Maintenance Scheduled maintenance value reset Yes/No Combination meter assembly
        METER SETTINGS

        Display Description Setting ECU
        Language Display language setting * Related ECUs
        Units Display units setting *
        Meter Type Multi-information display layout setting Analog/Digital Combination meter assembly
        Eco driving indicator light Eco driving indicator light display setting ON/OFF
        Audio tab Audio tab display setting ON/OFF
        Vehicle information tab Drive Info Type Displayed drive information display item setting Trip/Total
        Drive Info Items Displayed drive information display item setting -
        Trip Summary Current trip result display setting Drive Info/Eco Score
        Pop-Up Display TbT Navigation Interrupt display setting ON/OFF
        Telephone Interrupt display setting ON/OFF
        Audio Operation Interrupt display setting ON/OFF
        Volume Operation Interrupt display setting ON/OFF
        Voice Control Interrupt display setting ON/OFF
        Default Settings Reset the combination meter settings to the default setting Yes/No Related ECUs

        *: Changes according to the vehicle specification

scientia non olet · About LEMON Manuals