DTC C1610: Camera ECU Malfunction [11/2018 - 10/2022]: Procedure

1. Choose the model to be inspected.

   Result

   Result	Proceed to
   w/ Parking Assist Monitor System	A
   w/ Panoramic View Monitor System	B

Result: 

B 

See step  4

Result: 

A 

See step  2

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [11/2018 - 10/2019] , or refer to DTC CHECK / CLEAR [10/2019 - 10/2022]

   Chassis > Rear Camera > Clear DTCs 

2. Recheck for DTCs and check that no DTCs are output.

   Refer to DTC CHECK / CLEAR [11/2018 - 10/2019] , or refer to DTC CHECK / CLEAR [10/2019 - 10/2022]

   Chassis > Rear Camera > Trouble Codes 

   OK

   No DTCs are output.

   Result

   Proceed to
   OK
   NG

Result: 

NG 

GO TO PARKING ASSIST MONITOR SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - 10/2022] 

Result: 

OK 

See step  3

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [11/2018 - 10/2019] , or refer to DTC CHECK / CLEAR [10/2019 - 10/2022]

   Body Electrical > Navigation System > Clear DTCs 

2. Recheck for DTCs and check that no DTCs are output.

   Refer to DTC CHECK / CLEAR [11/2018 - 10/2019] , or refer to DTC CHECK / CLEAR [10/2019 - 10/2022]

   Body Electrical > Navigation System > Trouble Codes 

   OK

   No DTCs are output.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

END 

Result: 

NG 

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY. Refer to  REMOVAL [11/2018 - 10/2022] 

1. Clear the DTCs.

   for Gasoline Model: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - 10/2022]

   for HV Model: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - 10/2022]

   Chassis > Circumference Monitoring Camera Control Module > Clear DTCs 

2. Recheck for DTCs and check that no DTCs are output.

   for Gasoline Model: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - 10/2022]

   for HV Model: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - 10/2022]

   Chassis > Circumference Monitoring Camera Control Module > Trouble Codes 

   OK

   No DTCs are output.

   Result

   Proceed to
   OK
   NG

Result: 

NG 

GO TO PANORAMIC VIEW MONITOR SYSTEM 

for HV model: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - 10/2022]

for Gasoline model: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - 10/2022]

Result: 

OK 

See step  5

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [11/2018 - 10/2019] , or refer to DTC CHECK / CLEAR [10/2019 - 10/2022]

   Body Electrical > Navigation System > Clear DTCs 

2. Recheck for DTCs and check that no DTCs are output.

   Refer to DTC CHECK / CLEAR [11/2018 - 10/2019] , or refer to DTC CHECK / CLEAR [10/2019 - 10/2022]

   Body Electrical > Navigation System > Trouble Codes 

   OK

   No DTCs are output.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

END 

Result: 

NG 

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY. Refer to  REMOVAL [11/2018 - 10/2022]