LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2024 >> Prius XLE >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Panels / Trim - Service Information (2 Of 2) >> Rear Door Belt Moulding >> Removal [03/2023 - ] >> Procedure

Removal [03/2023 - ]: Procedure

  1. REMOVE REAR DOOR GLASS SUB-ASSEMBLY 

    Refer to DISASSEMBLY [03/2023 - ]

  2. REMOVE REAR DOOR BELT MOULDING ASSEMBLY 
    1. GTY1145018Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction - -
      1. Apply protective tape around the rear door belt moulding assembly as shown in the illustration.
      2. Disengage the 7 claws as shown in the illustration.
scientia non olet · About LEMON Manuals