Inspection [03/2023 - ]: Procedure

INSPECT VSC OFF SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY)

Measure the resistance according to the value(s) in the table below.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*A	for HEV Model
*B	for PHEV Model
*a	Component without harness connected (VSC OFF Switch (Electric Parking Brake Switch Assembly))

Standard Resistance

FOR HEV MODEL

Tester Connection	Condition	Specified Condition	Result
K22-3 (+) - K22-7 (E)	Switch pushed	Below 1 Ω	Ω
K22-3 (+) - K22-7 (E)	Switch not pushed	10 kΩ or higher	kΩ

FOR PHEV MODEL

Tester Connection	Condition	Specified Condition	Result
K22-13 (+) - K22-7 (E)	Switch pushed	Below 1 Ω	Ω
K22-13 (+) - K22-7 (E)	Switch not pushed	10 kΩ or higher	kΩ

INSPECT BRAKE HOLD SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY)

Measure the resistance according to the value(s) in the table below.

*A	for HEV Model
*B	for PHEV Model
*a	Component without harness connected (Brake Hold Switch (Electric Parking Brake Switch Assembly))

Standard Resistance

FOR HEV MODEL

Tester Connection	Condition	Specified Condition	Result
K22-6 (+B) - K22-7 (E)	Switch pushed	Below 1 Ω	Ω
K22-6 (+B) - K22-7 (E)	Switch not pushed	10 kΩ or higher	kΩ

FOR PHEV MODEL

Tester Connection	Condition	Specified Condition	Result
K22-4 (+B) - K22-7 (E)	Switch pushed	Below 1 Ω	Ω
K22-4 (+B) - K22-7 (E)	Switch not pushed	10 kΩ or higher	kΩ