LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2024 >> Prius LE >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge System - Diagnostics - Introduction >> Meter / Gauge System >> Data List / Active Test [03/2023 - ] >> Data List / Active Test [03/2023 - ]

Data List / Active Test [03/2023 - ]

  1. DATA LIST 
    NOTE:

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    HINT: 

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    1. Read the Data List according to the display on the GTS.
      1. Combination Meter

        HINT: 

        Depending on the specifications of the vehicle, some items may not be displayed.

        Body Electrical > Combination Meter > Data List 

        Tester Display Measurement Item Range Normal Condition Diagnostic Note
        Total Distance Traveled Total distance traveled Min.: 0, Max.: 16777215 - -
        Total Distance Traveled - Unit Total distance traveled unit km or mile - -
        ODO/TRIP Change Switch ODO/TRIP switch operation OFF or ON OFF: Switch released
        ON: Switch pushed        		 -
        Light Control Switch (UP) Light control rheostat up switch operation OFF or ON OFF: Switch released
        ON: Switch pushed        		 -
        Light Control Switch (DOWN) Light control rheostat down switch operation OFF or ON OFF: Switch released
        ON: Switch pushed        		 -
        Multi Switch (Up) Up switch on steering pad switch operation OFF or ON OFF: Switch released
        ON: Switch pushed        		 -
        Multi Switch (Down) Down switch on steering pad switch operation OFF or ON OFF: Switch released
        ON: Switch pushed        		 -
        Multi Switch (Left) Left switch on steering pad switch operation OFF or ON OFF: Switch released
        ON: Switch pushed        		 -
        Multi Switch (Right) Right switch on steering pad switch operation OFF or ON OFF: Switch released
        ON: Switch pushed        		 -
        Multi Switch (Enter) OK switch on steering pad switch operation OFF or ON OFF: Switch released
        ON: Switch pushed        		 -
        Multi Switch (Back) Back switch on steering pad switch operation OFF or ON OFF: Switch released
        ON: Switch pushed        		 -
        +B Voltage Auxiliary battery voltage
        (Combination meter assembly input)        		 Min.: 0.0 V, Max.: 25.4 V or Unset 11 to 14 V -
        Fuel Input Fuel level input Min.: 0.00 L, Max.: 655.34 L or Unset for HEV Model (except 4WD Model) 
        • Fuel receiver gauge indicates F: 37.06 L
        • Fuel receiver gauge indicates 3/4: 28.93 L
        • Fuel receiver gauge indicates 1/2: 20.80 L
        • Fuel receiver gauge indicates 1/4: 12.66 L
        • Fuel receiver gauge indicates E: 4.53 L

        for HEV Model (for 4WD Model) 

        • Fuel receiver gauge indicates F: 34.78 L
        • Fuel receiver gauge indicates 3/4: 27.18 L
        • Fuel receiver gauge indicates 1/2: 19.59 L
        • Fuel receiver gauge indicates 1/4: 11.99 L
        • Fuel receiver gauge indicates E: 4.39 L

        for PHEV Model 

        • Fuel receiver gauge indicates F: 34.60 L
        • Fuel receiver gauge indicates 3/4: 27.30 L
        • Fuel receiver gauge indicates 1/2: 20.00 L
        • Fuel receiver gauge indicates 1/4: 12.00 L
        • Fuel receiver gauge indicates E: 4.00 L
        		 The detected value of the fuel sender gauge assembly is displayed.
        Vehicle Speed Meter Vehicle speed input Min.: 0 km/h (0 mph), Max.: 254 km/h (158 mph) or Unset Almost the same as actual speedometer The value displayed on the speedometer may deviate.*
        Engine RPM Engine speed input Min.: 0 rpm, Max.: 12700 rpm or Unset Almost the same as actual engine RPM -
        Washer Level Warning Switch Washer fluid level warning switch input OFF or ON OFF: Washer fluid level not low
        ON: Washer fluid level low        		 -
        Driver Buckle Switch Seat belt buckle switch input
        (for Driver seat)        		 Fastened or Not Fastened Fastened: Driver seat belt buckle switch fastened
        Not Fastened: Driver seat belt buckle switch unfastened        		 -
        Hazard Flasher Switch Hazard warning signal switch input OFF or ON OFF: Hazard warning signal switch off
        ON: Hazard warning signal switch on        		 -
        Ambient Temperature (Celsius) Outside temperature input
        (Celsius)        		 Min.: -40.0°C, Max.: 87.0°C or Unset Almost the same as actual outside temperature -
        Ambient Temperature (Fahrenheit) Outside temperature input
        (Fahrenheit)        		 Min.: -40°F, Max.: 214°F or Unset Almost the same as actual outside temperature -
        Lighting System Existence of headlight ECU Without or With Without: w/o Headlight ECU
        With: w/ Headlight ECU        		 -
        Back Door System Existence of power back door system Without or With Without: w/o Power Back Door System
        With: w/ Power Back Door System        		 -
        Oil Pressure Switch Engine oil pressure switch input OFF or ON OFF: Engine started
        ON: Engine not started        		 -
        Oil Level Switch Engine oil level sensor input OFF or ON OFF: Engine oil level not low
        ON: Engine oil level low        		 -
        Coolant Temperature Engine coolant temperature input Min.: 0.0°C, Max.: 127.1°C or Unset 75 to 100°C: After warming up engine -
        Integrated value for Maintenance Maintenance required reminder value Min.: 0 miles, Max.: 25401 miles or Unset Driving distance after performing maintenance required reminder reset procedure displayed -
        TPMS System Existence of tire pressure warning system Without or With Without: w/o Tire Pressure Warning System
        With: w/ Tire Pressure Warning System        		 -
        VSC System Existence of electronically controlled brake system Without or With Without: w/o Electronically Controlled Brake System
        With: w/ Electronically Controlled Brake System        		 -
        LDA System Existence of lane departure alert system Without or With Without: w/o Lane departure alert system
        Without: w/o Lane departure alert system        		 -
        PCS System Existence of pre-collision system Without or With Without: w/o Pre-collision System
        With: w/ Pre-collision System        		 -
        ICS System Existence of parking support brake system Without or With Without: w/o Parking Support Brake System
        With: w/ Parking Support Brake System        		 -
        Radar Cruise System Existence of dynamic radar cruise control system Without or With Without: w/o Dynamic Radar Cruise Control System
        With: w/ Dynamic Radar Cruise Control System        		 -
        Intuitive P/A System Existence of intuitive parking assist system Without or With Without: w/o Intuitive Parking Assist System
        With: w/ Intuitive Parking Assist System        		 -
        Road Sign Assist System Existence of road sign assist system Without or With Without: w/o Road Sign Assist System
        With: w/ Road Sign Assist System        		 -
        HV/EV System Indicator Hybrid system indicator value Min.: -100%, Max.: 511% or Unset Current hybrid system indicator status If it is possible to customize the setting, the current setting is displayed.
        ODO Display Time After IG OFF Adjust Setting of trip result display time after the ignition switch is turned off 30s, 60s, 600s or OFF - If it is possible to customize the setting, the current setting is displayed.
        Tail Remind Buzzer Function Condition of the tail remind buzzer OFF or ON Customized setting displayed -
        Lane Change Flashing Times Adjust Setting of lane change flashing time adjustment OFF, 3, 4, 5, 6 or 7 Customized setting displayed -
        Flasher Sound Volume Adjust Setting of flasher sound volume adjustment Large, Medium or Small - If it is possible to customize the setting, the current setting is displayed.
        Sub Fuel Sender No. 2 fuel sender gauge assembly Without or With Without: w/o No. 2 Fuel Sender Gauge Assembly
        With: w/ No. 2 Fuel Sender Gauge Assembly        		 -
        FCTA System Existence of FCTA function Without or With Without: w/o FCTA function
        With: w/ FCTA function        		 -
        Navigation System Existence of navigation system Without or With Without: w/o Navigation System
        With: w/ Navigation System        		 -
        1. *: For the tolerance of each meter, refer to Operation Check.

          Refer to OPERATION CHECK [12/2022 - ] 

      2. Main Body

        Body Electrical > Main Body > Data List 

        Tester Display Measurement Item Range Normal Condition Diagnostic Note
        Support Service Function Setting of Suggestion Service OFF, Parked or ON - If it is possible to customize the setting, the current setting is displayed.
  2. ACTIVE TEST 

    HINT: 

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

    1. Perform the Active Test according the display on the GTS.

      HINT: 

      Depending on the specifications of the vehicle, some items may not be displayed.

      Body Electrical > Combination Meter > Active Test 

      Tester Display Measurement Item Control Range Diagnostic Note
      Fuel Gauge Operation (Sender E) Fuel receiver gauge
      (Fuel sender gauge lower limit)      		 ON See [Display 1]
      Fuel Gauge Operation (Empty) Fuel receiver gauge
      (Fuel receiver gauge indicates E)      		 ON See [Display 1]
      Fuel Gauge Operation (Warning) Fuel receiver gauge
      (Position at which fuel level warning light turns on/off)      		 ON See [Display 1]
      Fuel Gauge Operation (1/4) Fuel receiver gauge
      (Fuel receiver gauge indicates 1/4)      		 ON See [Display 1]
      Fuel Gauge Operation (1/2) Fuel receiver gauge
      (Fuel receiver gauge indicates 1/2)      		 ON See [Display 1]
      Fuel Gauge Operation (3/4) Fuel receiver gauge
      (Fuel receiver gauge indicates 3/4)      		 ON See [Display 1]
      Fuel Gauge Operation (Full) Fuel receiver gauge
      (Fuel receiver gauge indicates F)      		 ON See [Display 1]
      Fuel Gauge Operation (Sender F) Fuel receiver gauge
      (Fuel sender gauge upper limit)      		 ON See [Display 1]
      SOC Gauge (MIN) SOC gauge
      (SOC gauge indicates lower limit)      		 ON -
      SOC Gauge (1/4) SOC gauge
      (SOC gauge indicates 1/4)      		 ON -
      SOC Gauge (1/2) SOC gauge
      (SOC gauge indicates 1/2)      		 ON -
      SOC Gauge (3/4) SOC gauge
      (SOC gauge indicates 3/4)      		 ON -
      SOC Gauge (MAX) SOC gauge
      (SOC gauge indicates upper limit)      		 ON -
      Multi Display All (White) Multi-information display
      (White color display)      		 ON -
      Multi Display Default Screen Multi-information display
      (Default screen)      		 ON -
      High Beam Indicator High beam indicator light OFF or ON -
      Taillamp Indicator Tail indicator light OFF or ON -
      Rear Fog Lamp Indicator Rear fog indicator light OFF or ON -
      Automatic High Beam Indicator (Green) Automatic high beam/adaptive high beam indicator light OFF or ON -
      Left Turn Signal Indicator Turn indicator light
      (LH side)      		 OFF or ON -
      Right Turn Signal Indicator Turn indicator light
      (RH side)      		 OFF or ON -
      Driver Side Seat Belt Warning Driver or front passenger seat belt warning light OFF or ON -
      Airbag Warning SRS warning light OFF or ON -
      Coolant Hot Warning Lamp Engine coolant temperature hot warning light OFF or ON -
      Check Engine Warning MIL (Check engine warning light) OFF or ON -
      Brake Warning Brake warning light / red (malfunction) OFF or ON -
      Park Warning Parking brake indicator light OFF or ON -
      ABS Warning ABS warning light OFF or ON -
      ECB Warning Brake warning light / yellow (minor malfunction) OFF or ON -
      Slip Warning Slip indicator light OFF or ON -
      VSC OFF Indicator VSC OFF indicator light OFF or ON -
      Brake Hold Indicator Brake hold standby indicator light OFF or ON -
      Hold Indicator Brake hold operated indicator light OFF or ON -
      Tire Pressure Warning System Indicator Tire pressure warning light OFF or ON -
      EPS Warning EPS warning light
      (Red)      		 OFF or ON -
      PPS Warning EPS warning light
      (Amber)      		 OFF or ON -
      PCS OFF Warning PCS warning light OFF or ON -
      INTUITIVE P/A LCD OFF Indicator Clearance sonar LCD OFF indicator light OFF or ON -
      Ready Indicator Ready indicator light OFF or ON -
      Charge Warning (Red) Charge warning light
      (Red)      		 OFF or ON -
      ADAS Integrated Warning Driving assist information indicator light OFF or ON -
      Plus Support Indicator Plus Support indicator light OFF or ON -
      Speed Signal Input (0) Vehicle speed test signal input ON When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
      Speed Signal Input (40) Vehicle speed test signal input ON
      • When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
      • The value displayed on the speedometer may deviate.*
      Speed Signal Input (80) Vehicle speed test signal input ON
      • When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
      • The value displayed on the speedometer may deviate.*
      Speed Signal Input (120) Vehicle speed test signal input ON
      • When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
      • The value displayed on the speedometer may deviate.*
      Speed Signal Input (160) Vehicle speed test signal input ON
      • When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
      • for Speedometer Unit km/h Type:

        The value displayed on the speedometer may deviate.*

      • for Speedometer Unit MPH Type:

        The value displayed on the speedometer may deviate.
      Speed Signal Input (200) Vehicle speed test signal input ON
      • When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
      • for Speedometer Unit km/h Type:

        The value displayed on the speedometer may deviate.*

      • for Speedometer Unit MPH Type:

        When the value of the Active Test is more than or equal to the speedometer upper limit, the indicated speed stops at the upper limit.
      Speed Signal Input (240) Vehicle speed test signal input ON
      • When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
      • for Speedometer Unit km/h Type:

        The value displayed on the speedometer may deviate.*

      • for Speedometer Unit MPH Type:

        When the value of the Active Test is more than or equal to the speedometer upper limit, the indicated speed stops at the upper limit.
      Speed Signal Input (280) Vehicle speed test signal input ON
      • When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
      • When the value of the Active Test is more than or equal to the speedometer upper limit, the indicated speed stops at the upper limit.
      Speed Signal Input (320) Vehicle speed test signal input ON
      • When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
      • When the value of the Active Test is more than or equal to the speedometer upper limit, the indicated speed stops at the upper limit.
      Speed Signal Input (360) Vehicle speed test signal input ON
      • When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
      • When the value of the Active Test is more than or equal to the speedometer upper limit, the indicated speed stops at the upper limit.
      Speed Signal Input (400) Vehicle speed test signal input ON
      • When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
      • When the value of the Active Test is more than or equal to the speedometer upper limit, the indicated speed stops at the upper limit.
      ODO/TRIP Change Switch Performs the same operation as pressing the ODO/TRIP switch OFF or ON -
      Light Control Switch (UP) Performs the same operation as pressing the light control rheostat up switch OFF or ON -
      Light Control Switch (DOWN) Performs the same operation as pressing the light control rheostat down switch OFF or ON -
      Multi Switch (Up) Performs the same operation as pressing the up switch on steering pad switch OFF or ON -
      Multi Switch (Down) Performs the same operation as pressing the down switch on steering pad switch   -
      Multi Switch (Left) Performs the same operation as pressing the left switch on steering pad switch OFF or ON -
      Multi Switch (Right) Performs the same operation as pressing the right switch on steering pad switch OFF or ON -
      Multi Switch (Enter) Performs the same operation as pressing the OK switch on steering pad switch OFF or ON -
      Multi Switch (Back) Performs the same operation as pressing the back switch on steering pad switch OFF or ON -
      Intuitive P/A Front Buzzer (Short) Clearance warning buzzer
      • Detection direction: Front
      • Detection range: Near
      		 ON -
      Intuitive P/A Front Buzzer (Middle) Clearance warning buzzer
      • Detection direction: Front
      • Detection range: Middle
      		 ON -
      Intuitive P/A Front Buzzer (Far) Clearance warning buzzer
      • Detection direction: Front
      • Detection range: Far
      		 ON -
      Intuitive P/A Front Buzzer (Farthest) Clearance warning buzzer
      • Detection direction: Front
      • Detection range: Farthest
      		 ON -
      Intuitive P/A Rear Buzzer (Short) Clearance warning buzzer
      • Detection direction: Rear
      • Detection range: Near
      		 ON -
      Intuitive P/A Rear Buzzer (Middle) Clearance warning buzzer
      • Detection direction: Rear
      • Detection range: Middle
      		 ON -
      Intuitive P/A Rear Buzzer (Far) Clearance warning buzzer
      • Detection direction: Rear
      • Detection range: Far
      		 ON -
      Intuitive P/A Rear Buzzer (Farthest) Clearance warning buzzer
      • Detection direction: Rear
      • Detection range: Farthest
      		 ON -
      Intuitive P/A Front/Rear Buzzer (Short) Clearance warning buzzer
      • Detection direction: Front/Rear
      • Detection range: Near
      		 ON -
      Intuitive P/A Front/Rear Buzzer (Middle) Clearance warning buzzer
      • Detection direction: Front/Rear
      • Detection range: Middle
      		 ON -
      Intuitive P/A Front/Rear Buzzer (Far) Clearance warning buzzer
      • Detection direction: Front/Rear
      • Detection range: Far
      		 ON -
      Intuitive P/A Front/Rear Buzzer (Farthest) Clearance warning buzzer
      • Detection direction: Front/Rear
      • Detection range: Farthest
      		 ON -
      1. *: For the tolerance of each meter, refer to Operation Check.

        Refer to OPERATION CHECK [12/2022 - ] 

      HINT: 

      [Display 1]: Fuel Gauge Operation 

      1. GTY1143631Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Fuel Receiver Gauge
        *b Segments

        Refer to the following table for the specified fuel receiver gauge position for each selected value:

        Tester Display Fuel Receiver Gauge Indication
        Fuel Gauge Operation
        (Sender E)        		 Not indicated
        Fuel Gauge Operation
        (Empty)        		 Not indicated
        Fuel Gauge Operation
        (Warning)        		 Approximately 1 is indicated
        Fuel Gauge Operation
        (1/4)        		 Approximately 2 is indicated
        Fuel Gauge Operation
        (1/2)        		 Approximately 3 is indicated
        Fuel Gauge Operation
        (3/4)        		 Approximately 4 is indicated
        Fuel Gauge Operation
        (Full)        		 Approximately 5 is indicated
        Fuel Gauge Operation
        (Sender F)        		 Approximately 5 is indicated
scientia non olet · About LEMON Manuals