DTC P0335-31: Crankshaft Position Sensor "A" No Signal [02/2024 - ]: Description
This DTC is output when a malfunction has occurred in the engine pulse signal system from the ECM.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| P0335-31 | Crankshaft Position Sensor "A" No Signal | Engine started, engine speed is 500 rpm or higher and below 6000 rpm 3 seconds after the ignition switch is turned to ACC, the stereo component equalizer assembly detects a malfunction in the engine pulse signal system for 10 seconds or more continuously* |
|
Active Noise Control | A |
HINT:
*: Malfunction monitoring is not performed during the following conditions to prevent erroneous detection.
- The auxiliary battery voltage is less than 9.5 V.
- Before 3 seconds have elapsed after the auxiliary battery voltage has returned to normal.