LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2024 >> Land Cruiser Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Panels / Trim - Service Information (2 Of 2) >> Windshield Outside Moulding >> Removal [02/2024 - ] >> Procedure

Removal [02/2024 - ]: Procedure

  1. REMOVE FRONT FENDER NO. 2 TO COWL SIDE SEAL LH 

    Refer to PROCEDURE - Step 4

  2. REMOVE FRONT FENDER TO COWL SIDE SEAL LH 

    Refer to PROCEDURE - Step 6

  3. REMOVE LOWER WINDSHIELD MOULDING OUTSIDE LH 
    1. GTY1221803Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction - -
      1. Put protective tape around the lower windshield moulding outside LH.
      2. Detach the claw and remove the lower windshield moulding outside LH as shown in the illustration.
  4. REMOVE NO. 1 WINDSHIELD OUTSIDE MOULDING FASTENER 
    1. GTY1222288Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE NO. 1 WINDSHIELD OUTSIDE MOULDING CLIP 
    1. GTY1222289Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals