Headup Display Malfunction [02/2024 - ]: Procedure

1. Check for DTCs.

   Body Electrical > Combination Meter > Trouble Codes 

   Result

   Result	Proceed to
   DTCs are not output	A
   DTCs are output	B

Result: 

B 

GO TO DIAGNOSTIC TROUBLE CODE CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [02/2024 - ] 

Result: 

A 

See step  2

1. Check the problem symptoms.

   Result

   Result	Proceed to
   Display position abnormality	A
   Display screen abnormality	B

Result: 

B 

See step  6

Result: 

A 

See step  3

1. Perform the Active Test according to the display on the GTS.

   Body Electrical > Combination Meter > Active Test 

   Tester Display	Measurement Item	Control Range	Diagnostic Note
   HUD Display Position	This test activates the operation of HUD Display Position	Up (+3), Up (+2), Up (+1), Center, Down (-1), Down (-2) or Down (-3)	-

   Body Electrical > Combination Meter > Active Test 

   Tester Display
   HUD Display Position

   Result

   Result	Proceed to
   Active Test can be performed correctly	A
   Active Test cannot be performed correctly	B

Result: 

B 

REPLACE METER MIRROR SUB-ASSEMBLY. Refer to  REMOVAL [02/2024 - ] 

Result: 

A 

See step  4

1. Check that the meter mirror sub-assembly is correctly installed to the vehicle.

   Result

   Proceed to
   OK
   NG

Result: 

NG 

INSTALL METER MIRROR SUB-ASSEMBLY 

Result: 

OK 

See step  5

1. Adjusts headup display position using the customize setting.

   Refer to CUSTOMIZE PARAMETERS [02/2024 - ]

   Result

   Result	Proceed to
   Problem symptoms disappear	A
   Problem symptoms do not disappear	B

Result: 

A 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [02/2024 - ] 

Result: 

B 

REPLACE COMBINATION METER ASSEMBLY. Refer to  REMOVAL [02/2024 - ] 

1. Perform the Active Test according to the display on the GTS.

   Body Electrical > Combination Meter > Active Test 

   Tester Display	Measurement Item	Control Range	Diagnostic Note
   Color Test Screen (Black)	Headup display (Black color display)	ON	-
   Color Test Screen (White)	Headup display (White color display)	ON	-
   Color Test Screen (Red)	Headup display (Red color display)	ON	-
   Color Test Screen (Green)	Headup display (Green color display)	ON	-
   Color Test Screen (Blue)	Headup display (Green color display)	ON	-
   Color Test Screen (Color Bars)	Headup display (Color bars)	ON	-
   Liquid Crystal Display Backlight Brightness	This test activates the operation of Liquid Crystal Display Backlight Brightness	0 to 100%	-

   Body Electrical > Combination Meter > Active Test 

   Tester Display
   Color Test Screen (Black)

   Body Electrical > Combination Meter > Active Test 

   Tester Display
   Color Test Screen (White)

   Body Electrical > Combination Meter > Active Test 

   Tester Display
   Color Test Screen (Red)

   Body Electrical > Combination Meter > Active Test 

   Tester Display
   Color Test Screen (Green)

   Body Electrical > Combination Meter > Active Test 

   Tester Display
   Color Test Screen (Blue)

   Body Electrical > Combination Meter > Active Test 

   Tester Display
   Color Test Screen (Color Bars)

   Body Electrical > Combination Meter > Active Test 

   Tester Display
   Liquid Crystal Display Backlight Brightness

   Result

   Result	Proceed to
   Active Test can be performed correctly	A
   Active Test cannot be performed correctly	B

Result: 

B 

REPLACE METER MIRROR SUB-ASSEMBLY. Refer to  REMOVAL [02/2024 - ] 

Result: 

A 

See step  7

1. Adjusts headup display image using the customize setting.

   Refer to CUSTOMIZE PARAMETERS [02/2024 - ]

   Result

   Result	Proceed to
   Problem symptoms disappear	A
   Problem symptoms do not disappear	B

Result: 

A 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [02/2024 - ] 

Result: 

B 

REPLACE COMBINATION METER ASSEMBLY. Refer to  REMOVAL [02/2024 - ]