Removal [03/2019 - 09/2022]: Procedure
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
- Loosen the nut and disconnect the cable from the negative (-) battery terminal.NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Refer to INITIALIZATION [03/2019 - 09/2019] , or refer to INITIALIZATION [09/2019 - 04/2020] , or refer to INITIALIZATION [04/2020 - 09/2022]
- Loosen the nut and disconnect the cable from the negative (-) battery terminal.
- REMOVE BATTERY
- Disengage the 2 claws to remove the fusible link cover.
- Loosen the nut.
- Disengage the clamp and disconnect the cable from the positive (+) battery terminal.
Remove in this Direction Remove in this Direction Remove the bolt.
- Remove the No. 2 battery clamp as shown in the illustration.
- Remove the battery from the vehicle.
- Disengage the 2 claws to remove the fusible link cover.