LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2024 >> Corolla LE >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance - Service Information (3 Of 3) >> M20A-FKS Battery >> Removal [01/2019 - 03/2019] >> Procedure

Removal [01/2019 - 03/2019]: Procedure

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    1. Loosen the nut and disconnect the cable from the negative (-) battery terminal.
      GTY887654Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Refer to INITIALIZATION [01/2019 - 03/2019]

  2. REMOVE BATTERY 
    1. Disengage the 2 claws to remove the fusible link cover.
      GTY887661Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Loosen the nut.
      GTY887662Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the clamp and disconnect the cable from the positive (+) battery terminal.
      GTY868675Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    4. GTY884211Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction

      Remove the bolt.

    5. Remove the No. 2 battery clamp as shown in the illustration.
    6. Remove the battery from the vehicle.
scientia non olet · About LEMON Manuals