LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2024 >> Corolla LE >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance - Service Information (1 Of 3) >> M20A-FKS Drive Belt >> Removal [06/2018 - 01/2019] >> Procedure

Removal [06/2018 - 01/2019]: Procedure

  1. REMOVE REAR ENGINE UNDER COVER RH 
    1. Remove the screw, 7 clips and rear engine under cover RH from the vehicle.
      GTY919752Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE V-RIBBED BELT 
    1. Release the V-ribbed belt tension by turning the V-ribbed belt tensioner assembly counterclockwise.
      GTY918732Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn the V-ribbed belt tensioner assembly counterclockwise to align its holes, and then insert a 5 mm hexagon wrench to secure the V-ribbed belt tensioner assembly.
    3. Remove the V-ribbed belt.
scientia non olet · About LEMON Manuals