Air Conditioning Amplifier Communication Stop Mode [01/2019 - 09/2022]: Description

WARNING: This page is about a different variant/trim than selected.

Detection Item	Symptom	Trouble Area
Air Conditioning Amplifier Communication Stop Mode	Any of the following conditions are met: Communication stop for "Air Conditioning Amplifier" is indicated on the "Communication Bus Check" screen of the Techstream. Refer to PROBLEM SYMPTOMS TABLE [01/2019 - 04/2020] , or refer to PROBLEM SYMPTOMS TABLE [04/2020 - 09/2022] Communication stop history for "Air Conditioning Amplifier" is indicated on the "Communication Bus Check (Detail)" screen of the Techstream. (The Lost Communication Time value for "Air Conditioning Amplifier" is 6 or more.) Refer to PROBLEM SYMPTOMS TABLE [01/2019 - 04/2020] , or refer to PROBLEM SYMPTOMS TABLE [04/2020 - 09/2022] Communication system DTCs (DTCs that start with U) that correspond to "Air Conditioning Amplifier Communication Stop Mode" in "DTC Combination Table" are output. Refer to DTC COMBINATION TABLE [01/2019 - 04/2020] , or refer to DTC COMBINATION TABLE [04/2020 - 09/2022]	Air conditioning amplifier assembly branch line or connector Power source circuit of air conditioning amplifier assembly Air conditioning amplifier assembly ground circuit Air conditioning amplifier assembly