DTC C1300: Skid Control ECU Malfunction [01/2019 - 09/2022]: Description
WARNING: This page is about a different variant/trim than selected.
| DTC No. |
Detection Item |
INF Code |
DTC Detection Condition |
Trouble Area |
MIL |
Note |
| C1300 |
Skid Control ECU Malfunction |
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049 |
- INF Code: 1028 to 1044, 1047 to 1049
- Skid control ECU (brake booster with master cylinder assembly) internal malfunction.
- INF Code: 1046
- Sudden drop of power source voltage or skid control ECU (brake booster with master cylinder assembly) internal malfunction.
- INF Code: 1045
- An open is detected in the brake booster pump assembly circuit or skid control ECU (brake booster with master cylinder assembly) internal malfunction.
|
- INF Code: 1028 to 1044, 1047 to 1049
- Skid control ECU (brake booster with master cylinder assembly)
- INF Code: 1046
- Auxiliary battery
- Hybrid control system (Charging circuit)
- Skid control ECU (brake booster with master cylinder assembly)
- INF Code: 1045
- Brake booster pump assembly
- Wire harness or connector
- Skid control ECU (brake booster with master cylinder assembly)
|
Comes on |
- INF Code 1031 and 1032: SAE Code C0597 (Case 1)
- INF Code 1030 and 1033: SAE Code C0597 (Case 2)
- INF Code 1028: SAE Code C0597 (Case 3)
- INF Code 1029 and 1034 to 1049: SAE Code C0597 (Case 4)
- Electronically controlled brake system DTC
|