Caution / Notice / Hint

WARNING: This page is about a different variant/trim than selected.

NOTE:

When replacing the tire pressure warning ECU and receiver, first use the Techstream to record all of the current IDs and registered tires with transmitters (4 or 5 tires) of the tire pressure warning valve and transmitter registered to the tire pressure warning ECU and receiver.
It is necessary to perform initialization. Refer to INITIALIZATION [09/2022 - ] after registration. Refer to REGISTRATION [09/2022 - 03/2023] , or refer to REGISTRATION [03/2023 - ] of the transmitter IDs into the tire pressure warning ECU and receiver if the ECU has been replaced.