Caution / Notice / Hint

WARNING: This page is about a different variant/trim than selected.

NOTE:

When replacing the tire pressure warning ECU and receiver, first use the Techstream to record all of the current IDs and registered tires with transmitters (4 or 5 tires) of the tire pressure warning valve and transmitter registered to the tire pressure warning ECU and receiver.
It is necessary to perform initialization after registration of the transmitter IDs into the tire pressure warning ECU and receiver if one of the valve and transmitters has been replaced.
for Registration:

Refer to REGISTRATION [09/2022 - 03/2023] , or refer to REGISTRATION [03/2023 - ]

for Initialization

Refer to INITIALIZATION [09/2022 - ]