LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2024 >> Corolla LE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Engine Control System (2ZR-FXE) - Circuit Tests (2 Of 2) & Symptom Tests) >> SFI System >> MIL Circuit [09/2022 - ] >> Description

MIL Circuit [09/2022 - ]: Description

WARNING: This page is about a different variant/trim than selected.

The Malfunction Indicator Lamp (MIL) is used to indicate vehicle malfunctions detected by the ECM.

The MIL operation can be checked visually. When the power switch is turned on (IG), the MIL should be illuminated and should then turn off after the power switch is turned on (READY). If the MIL remains illuminated or is does not illuminate, conduct the following troubleshooting procedure.

scientia non olet · About LEMON Manuals