DTC C13AA: EPB High Temperature [01/2019 - 09/2022]: Description

WARNING: This page is about a different variant/trim than selected.

If the electric parking brake is used continuously, system operation is stopped to prevent the parking brake actuator assembly from overheating.

This DTC is stored when system operation is stopped to prevent the parking brake actuator assembly from overheating and is not a malfunction.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	Memory	Note
C13AA	EPB High Temperature	Both of following conditions are met: Electric parking brake is operating Lock and release operations are performed 10 times without 2 seconds periods of no operation; or lock and release operations are performed 5 times without 2 seconds periods of no operation, and target current is not applied during lock control	Overheat due to continuous use of system	DTC stored	A warning is displayed on the multi-information display indicating electric parking brake system operation is stopped due to high temperatures.

DTC DETECTION CONDITIONS

		Vehicle Condition
		Pattern 1	Pattern 2
Diagnosis Condition	Electric parking brake is operating	◦	◦
Malfunction Status	Lock and release operations are performed without 2 seconds interval 10 times	◦	-
Malfunction Status	Lock and release operations are performed without 2 seconds interval 5 times, and target current is not achieved during lock control	-	◦
Detection Time		-	-
Number of Trips		1 trip	1 trip

HINT:

DTC will be output when conditions for either of the patterns in the table above are met.