LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2024 >> Corolla LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Engine Lubrication System (2ZR-FAE) - Service Information) >> Oil Pump >> Reassembly [01/2019 - 11/2022] >> Procedure

Reassembly [01/2019 - 11/2022]: Procedure

WARNING: This page is about a different car, the 2022 Toyota Corolla, 2021 Toyota Corolla, 2020 Toyota Corolla, and 2019 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL OIL PUMP RELIEF VALVE 
    1. Coat the oil pump relief valve with engine oil.
      GTY744452Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Oil Pump Relief Valve
      *2 Oil Pump Relief Valve Spring
      *3 Oil Pump Relief Valve Plug
    2. Insert the oil pump relief valve and oil pump relief valve spring into the oil pump body.
    3. Using a 22 mm socket wrench, install the oil pump relief valve plug to the oil pump body.

      Torque: 37 N.m (377 kgf/cm, 27 ft.lbf) 

  2. INSTALL OIL PUMP ROTOR SET 
    1. Coat the oil pump drive rotor and oil pump driven rotor with engine oil, and place them into the oil pump body with the marks facing the oil pump cover sub-assembly side.
      GTY760628Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Mark
  3. INSTALL OIL PUMP COVER SUB-ASSEMBLY 
    1. Install the oil pump cover sub-assembly to the oil pump body with the 6 bolts.
      GTY426118Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 8.8 N.m (90 kgf/cm, 78 in.lbf) 

scientia non olet · About LEMON Manuals