LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2024 >> Corolla LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Meter / Gauge System (HEV) - Diagnostic Codes, Symptom Tests & Circuit Tests) >> METER / GAUGE SYSTEM (for HV Model) >> Tachometer Malfunction [04/2020 - 09/2022] >> Procedure

Tachometer Malfunction [04/2020 - 09/2022]: Procedure

WARNING: This page is about a different car, the 2022 Toyota Corolla, 2021 Toyota Corolla, and 2020 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CAN COMMUNICATION SYSTEM 
    1. Check if CAN communication DTCs are output.

      Refer to DIAGNOSIS SYSTEM [04/2020 - 09/2022]

      Result

      Result Proceed to
      DTCs are not output A
      DTCs are output B

    Result: 

    GO TO CAN COMMUNICATION SYSTEM 

    Refer to HOW TO PROCEED WITH TROUBLESHOOTING [01/2019 - 09/2022]

    Result: 

    See step  2

  2. CHECK FOR DTC (HYBRID CONTROL SYSTEM) 
    1. Check if hybrid control system DTCs are output.

      Powertrain > Hybrid Control > Trouble Codes 

      Result

      Result Proceed to
      DTCs are not output A
      DTCs are output B

    Result: 

    GO TO HYBRID CONTROL SYSTEM 

    for Nickel Metal Hydride Battery: Refer to DIAGNOSTIC TROUBLE CODE CHART [04/2020 - 09/2022]

    for Lithium-ion Battery: Refer to DIAGNOSTIC TROUBLE CODE CHART [04/2020 - 09/2022]

    Result: 

    See step  3

  3. PERFORM ACTIVE TEST USING TECHSTREAM 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Combination Meter / Active Test.
    5. Perform the Active Test according to the display on the Techstream.

      Body Electrical > Combination Meter > Active Test 

      Tester Display Measurement Item Control Range Diagnostic Note
      TachoMeter Operation (0rpm) Tachometer
      (0 rpm)
      ON -
      TachoMeter Operation (1000rpm) Tachometer
      (1000 rpm)
      ON -
      TachoMeter Operation (2000rpm) Tachometer
      (2000 rpm)
      ON -
      TachoMeter Operation (3000rpm) Tachometer
      (3000 rpm)
      ON -
      TachoMeter Operation (4000rpm) Tachometer
      (4000 rpm)
      ON -
      TachoMeter Operation (5000rpm) Tachometer
      (5000 rpm)
      ON -
      TachoMeter Operation (6000rpm) Tachometer
      (6000 rpm)
      ON -
      TachoMeter Operation (7000rpm) Tachometer
      (7000 rpm)
      ON -

      Body Electrical > Combination Meter > Active Test 

      Tester Display
      TachoMeter Operation (0rpm)

      Body Electrical > Combination Meter > Active Test 

      Tester Display
      TachoMeter Operation (1000rpm)

      Body Electrical > Combination Meter > Active Test 

      Tester Display
      TachoMeter Operation (2000rpm)

      Body Electrical > Combination Meter > Active Test 

      Tester Display
      TachoMeter Operation (3000rpm)

      Body Electrical > Combination Meter > Active Test 

      Tester Display
      TachoMeter Operation (4000rpm)

      Body Electrical > Combination Meter > Active Test 

      Tester Display
      TachoMeter Operation (5000rpm)

      Body Electrical > Combination Meter > Active Test 

      Tester Display
      TachoMeter Operation (6000rpm)

      Body Electrical > Combination Meter > Active Test 

      Tester Display
      TachoMeter Operation (7000rpm)

      OK

      Tachometer indication is normal.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    REPLACE HYBRID VEHICLE CONTROL ECU 

    Refer to REMOVAL [04/2020 - 09/2022]

    Result: 

    NG 

    REPLACE COMBINATION METER ASSEMBLY 

    Refer to REMOVAL [03/2019 - 09/2022]