Removal [11/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota GR Corolla, 2024 Toyota GR Corolla, and 2023 Toyota GR Corolla. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
Refer to REMOVAL [11/2022 - ]
REMOVE FUEL PUMP
Refer to DISASSEMBLY [09/2022 - ]

REMOVE FUEL MAIN VALVE ASSEMBLY

Remove the clip from the fuel filter.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Using a screwdriver with its tip wrapped with protective tape, remove the fuel main valve assembly from the fuel filter.

NOTE:

Pull out the fuel main valve assembly carefully because the O-rings are firmly installed between the fuel main valve assembly and fuel filter.
Do not damage the fuel filter.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Protective Tape

Remove the 2 O-rings from the fuel main valve assembly.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

O-ring

REMOVE NO. 2 FUEL MAIN VALVE ASSEMBLY

Remove the clip from the fuel filter.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Using a screwdriver with its tip wrapped with protective tape, remove the No. 2 fuel main valve assembly from the fuel filter.

NOTE:

Pull out the No. 2 fuel main valve assembly carefully because the O-rings are firmly installed between the No. 2 fuel main valve assembly and fuel filter.
Do not damage the fuel filter.

*a	Protective Tape

Remove the 2 O-rings from the No. 2 fuel main valve assembly.

O-ring