Customize Parameters [09/2022 - 11/2022]

WARNING: This page is about a different car, the 2023 Toyota GR Corolla and 2023 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

CUSTOMIZE LIGHTING SYSTEM (INT)

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

HINT:

The following items can be customized.

Customizing using the Techstream

Select the setting by referring to the table below.

Illuminated Entry

Tester Display	Description	Default	Setting	ECU
Lighting Time	Changes the lighting time of the following lights that are operated by the timer function when the door linked switch of the map light assembly is on and the switch of the No. 1 room light assembly is in the DOOR position: Map light assembly No. 1 room light assembly	15 s	10:30 s, 00:15 s, 01:7.5 s	Main body ECU (Multiplex network body ECU)
I/L when ACC OFF	Lights up the following lights automatically when the door linked switch of the map light assembly is on, the switch of the No. 1 room light assembly is in the DOOR position and the ignition switch is turned from on (IG) or on (ACC) to off: Map light assembly No. 1 room light assembly	ON	0:OFF, 1:ON	Main body ECU (Multiplex network body ECU)
I/L ON W/Door Key Unlock	Lights up the following lights automatically when the door linked switch of the map light assembly is on, the switch of the No. 1 room light assembly is in the DOOR position and the doors are unlocked by an unlock operation: Map light assembly No. 1 room light assembly	ON	0:OFF, 1:ON	Main body ECU (Multiplex network body ECU)
Room Light when Aprchd	Lights up the following lights when the door linked switch of the map light assembly is on, the switch of the No. 1 room light assembly is in the DOOR position and the electrical key transmitter sub-assembly is brought near the vehicle*: Map light assembly No. 1 room light assembly	ON	0:OFF, 1:ON	Main body ECU (Multiplex network body ECU)
Inside Foot Light	-	-	0:OFF, 1:ON	Cannot be used
Light Control	-	-	0:OFF, 1:ON	Cannot be used
Interior Light Control	Lights up the following lights: Map light assembly No. 1 room light assembly	ON	0:OFF, 1:ON	Main body ECU (Multiplex network body ECU)
Interior Illumination Light	-	-	0:OFF, 1:ON	Cannot be used

*: w/ Smart Key System

Customizing with the multi-display

Turn the ignition switch to ON.
Enter the following menus: MENU / Settings / Vehicle Customize / Lights.

Select the setting by referring to the table below.

Display	Default	Content	Setting	Relevant ECU
Interior Lights Auto-off Timer	15 sec.	Changes the lighting time of the following lights that are operated by the timer function when the door linked switch of the map light assembly is on and the switch of the No. 1 room light assembly is in the DOOR position: Map light assembly No. 1 room light assembly	Off, 7.5 sec., 15 sec., 30 sec.	Main body ECU (Multiplex network body ECU)