Removal [03/2019 - 09/2022]: Procedure
WARNING: This page is about a different car, the 2022 Toyota Corolla, 2021 Toyota Corolla, 2020 Toyota Corolla, and 2019 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
Refer to REMOVAL [03/2019 - 09/2022]
- DRAIN FUEL
- REMOVE TAIL EXHAUST PIPE ASSEMBLY
Refer to REMOVAL [01/2019 - 11/2022]
- REMOVE REAR FLOOR SIDE MEMBER COVER LH (w/ Cover)
Refer to PROCEDURE - Step 2 [01/2019 - 09/2020] , or refer to PROCEDURE - Step 2 [09/2020 - 09/2022]
- REMOVE REAR FLOOR SIDE MEMBER COVER RH (w/ Cover)
Refer to PROCEDURE - Step 3 [01/2019 - 09/2020] , or refer to PROCEDURE - Step 3 [09/2020 - 09/2022]
- REMOVE NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY
- DISCONNECT CHARCOAL CANISTER OUTLET HOSE
- DISCONNECT FUEL TANK TO FILLER PIPE HOSE
- DISCONNECT NO. 1 FUEL EVAPORATION TUBE SUB-ASSEMBLY
- Disconnect the No. 1 fuel evaporation tube sub-assembly from the fuel pipe.
Refer to PRECAUTION [03/2019 - 09/2022]
- Disconnect the No. 1 fuel evaporation tube sub-assembly from the fuel pipe.
- DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY
- Disconnect the fuel tank main tube sub-assembly from the fuel pipe.
Refer to PRECAUTION [03/2019 - 09/2022]
- Disconnect the fuel tank main tube sub-assembly from the fuel pipe.
- REMOVE FUEL TANK ASSEMBLY WARNING:
The fuel tank assembly is very heavy. Be sure to follow the procedure described in the repair information, or the fuel tank assembly may fall off the engine lifter.
- Disconnect the fuel tank breather tube from the fuel tank filler pipe sub-assembly.
Refer to PRECAUTION [03/2019 - 09/2022]
- Support the fuel tank assembly using an engine lifter.
HINT:
Using height adjustment attachments and plate lift attachments, keep the fuel tank assembly horizontal.
- Remove the 4 bolts, No. 1 fuel tank band sub-assembly LH and No. 1 fuel tank band sub-assembly RH.
- Lower the engine lifter to remove the fuel tank assembly.NOTE:
- Be careful not to drop the fuel tank assembly.
- When removing the fuel tank assembly, tilt it slightly to prevent it from interfering with the surrounding parts.
- Disconnect the fuel tank breather tube from the fuel tank filler pipe sub-assembly.
- REMOVE NO. 1 FUEL EVAPORATION TUBE SUB-ASSEMBLY
- REMOVE CHARCOAL CANISTER OUTLET HOSE
- REMOVE FUEL TANK MAIN TUBE SUB-ASSEMBLY
- REMOVE NO. 2 FUEL TANK CUSHION