DTC P2767: Input / Turbine Speed Sensor "B" Circuit No Signal [01/2019 - 11/2022]: Description
WARNING: This page is about a different car, the 2022 Toyota Corolla, 2021 Toyota Corolla, 2020 Toyota Corolla, and 2019 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
The ECM detects the input shaft speed based on the signal from the revolution sensor (transmission revolution sensor (NIN)) and performs gear ratio control.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory |
|---|---|---|---|---|---|
| P2767 | Input / Turbine Speed Sensor "B" Circuit No Signal | While the vehicle is driven with the shift lever in D and the SPD signal is 300 rpm or more, the speed indicated by the transmission revolution sensor (NIN) is less than 300 rpm for 2 seconds (1-trip detection logic). |
|
Comes on | DTC stored |