Inspection [06/2018 - 11/2022]: Procedure
WARNING: This page is about a different car, the 2022 Toyota Corolla, 2021 Toyota Corolla, 2020 Toyota Corolla, and 2019 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT BACK-UP LIGHT SWITCH ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
Standard Resistance
| Tester Connection |
Switch Condition |
Specified Condition |
| 1 - 2 |
Pushed |
Below 1 Ω |
| Released |
10 kΩ or higher |
If the result is not as specified, replace the back-up light switch assembly.