Removal [11/2022 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 Toyota GR Corolla, 2024 Toyota GR Corolla, 2023 Toyota GR Corolla, 2022 Toyota Corolla, and 2021 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 1 [11/2022 - 09/2024] , or refer to PROCEDURE - Step 1 [09/2024 - ]
DISCONNECT CLUTCH MASTER CYLINDER ASSEMBLY
See step 3

REMOVE CLUTCH START SWITCH ASSEMBLY

Disconnect the clutch start switch assembly connector.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the nut and clutch start switch assembly from the clutch pedal support sub-assembly.

NOTE:

To prevent damage to the clutch start switch assembly, make sure not to rotate it during removal.