Inspection [11/2022 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 Toyota GR Corolla, 2024 Toyota GR Corolla, 2023 Toyota GR Corolla, 2022 Toyota Corolla, and 2021 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT CLUTCH START SWITCH ASSEMBLY
- Check the resistance.
- Measure the resistance according to the value(s) in the table below.
*a Component without harness connected
(Clutch Start Switch Assembly)*b 11.65 to 12.35 mm (0.459 to 0.486 in.) *c On *d Off Standard Resistance
Tester Connection Condition Specified Condition 1 - 2 On (Pushed in) Below 1 Ω Off (Released) 10 kΩ or higher If the result is not as specified, replace the clutch start switch assembly.
- Measure the resistance according to the value(s) in the table below.
- Check the resistance.