LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2024 >> Corolla LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 318 (Manual Transaxle System - Service Information (1 Of 2)) >> Back-Up Light Switch >> Inspection [09/2022 - ] >> Procedure

Inspection [09/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota GR Corolla, 2024 Toyota GR Corolla, and 2023 Toyota GR Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT BACK-UP LIGHT SWITCH ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY1116272Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Push
      *b Release
      *c Component without harness connected
      (Back-up Light Switch Assembly)

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 Pushed Below 1 Ω
      Released 10 kΩ or higher

      If the result is not as specified, replace the back-up light switch assembly.

scientia non olet · About LEMON Manuals